Solar plant: site data
Solar power plant in Shepit, Kosivskyi Raion, Ivano-Frankivsk Oblast
Shepit: 1,027 kWh per kWp a year, tilt 37° 7° west of south (PVGIS). 6.4% below the oblast median (1,097). #38 of 41 in the rayon, #656 of 700 in the oblast.
Kosiv, the rayon centre, is 18 km away. 669 m above sea level — above 500 m the DBN snow and wind are higher. 12 km away: Verkhovyna, the nearest bigger centre, 1,074 — 4.3% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 74 km. 10.65 m between rows, pitch 14.47 m (latitude 48.3°).
- Yield of 1 kWp
- 1,027kWh/year
- Tilt
- 37°7° west of south
- 10 kW
- 10,270kWh/year
- Row pitch
- 14.47m · GCR 0.33
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Shepit
The designer opens with this place’s coordinates, latitude 48.3° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 74 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
July: 120 kWh/kWp, December: 42 — 2.9 times less.
June: 110 against 123 in the oblast, 10.6% less.
| kWp | A year | July | December |
|---|---|---|---|
| 5 | 5,135 | 600 | 210 |
| 10 | 10,270 | 1,200 | 420 |
| 15 | 15,405 | 1,800 | 630 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Snidavka3 km1,060 kWh/kWp
- Brustury4 km1,071 kWh/kWp
- Rechka6 km1,046 kWh/kWp
- Berezhnytsia7 km1,033 kWh/kWp
- Prokurava8 km1,073 kWh/kWp
- Kosmach8 km1,076 kWh/kWp
All places: Kosivskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.