Solar plant: site data
Solar power plant in Pochosa, Kosivskyi Raion, Ivano-Frankivsk Oblast
Pochosa: 1,062 kWh per kWp a year, tilt 40° 15° east of south (PVGIS). 3.2% below the oblast median (1,097). #32 of 41 in the rayon, #590 of 700 in the oblast.
Kosiv, the rayon centre, is 23 km away. 760 m above sea level — above 500 m the DBN snow and wind are higher. 19 km away: Verkhovyna, the nearest bigger centre, 1,074 — 1.1% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 67 km. 11.42 m between rows, pitch 15.08 m (latitude 48.3°).
- Yield of 1 kWp
- 1,062kWh/year
- Tilt
- 40°15° east of south
- 10 kW
- 10,616kWh/year
- Row pitch
- 15.08m · GCR 0.32
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Pochosa
The designer opens with this place’s coordinates, latitude 48.3° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 67 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
July: 119 kWh/kWp, December: 45 — 2.6 times less.
November: 58 against 48 in the oblast, 20.8% more.
| kWp | A year | July | December |
|---|---|---|---|
| 5 | 5,308 | 595 | 225 |
| 10 | 10,616 | 1,190 | 450 |
| 15 | 15,924 | 1,785 | 675 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Kosmach3 km1,076 kWh/kWp
- Akreshory5 km1,071 kWh/kWp
- Tekuche7 km1,081 kWh/kWp
- Brustury8 km1,071 kWh/kWp
- Prokurava9 km1,073 kWh/kWp
- Shepit9 km1,027 kWh/kWp
All places: Kosivskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.