Solar plant: site data
Solar power plant in Daruv, Kaluskyi Raion, Ivano-Frankivsk Oblast
Daruv: 875 kWh per kWp a year, tilt 30° facing south (PVGIS). 20.3% below the oblast median (1,097). #162 of 162 in the rayon, #700 of 700 in the oblast.
Kalush, the rayon centre, is 58 km away. 886 m above sea level — above 500 m the DBN snow and wind are higher. 42 km away: Nadvirna, the nearest bigger centre, 1,085 — 19.4% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 65 km. 9.03 m between rows, pitch 13.17 m (latitude 48.6°).
- Yield of 1 kWp
- 875kWh/year
- Tilt
- 30°facing south
- 10 kW
- 8,745kWh/year
- Row pitch
- 13.17m · GCR 0.36
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Daruv
The designer opens with this place’s coordinates, latitude 48.6° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 65 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
August: 115 kWh/kWp, December: 10 — 11.5 times less.
December: 10 against 38 in the oblast, 73.7% less.
| kWp | A year | August | December |
|---|---|---|---|
| 5 | 4,373 | 575 | 50 |
| 10 | 8,745 | 1,150 | 100 |
| 15 | 13,118 | 1,725 | 150 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Splai8 km1,002 kWh/kWp
- Osmoloda10 km971 kWh/kWp
- Kuzmynets13 km1,007 kWh/kWp
- Stara Huta16 km1,004 kWh/kWp
- Hrynkiv16 km1,040 kWh/kWp
- Cherezh17 km996 kWh/kWp
All places: Kaluskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.