Solar plant: site data
Solar power plant in Splai, Kaluskyi Raion, Ivano-Frankivsk Oblast
Splai: 1,002 kWh per kWp a year, tilt 38° 16° east of south (PVGIS). 8.6% below the oblast median (1,097). #157 of 162 in the rayon, #677 of 700 in the oblast.
Kalush, the rayon centre, is 65 km away. 1,000 m above sea level — above 500 m the DBN snow and wind are higher. 48 km away: Nadvirna, the nearest bigger centre, 1,085 — 7.6% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 73 km. 11.07 m between rows, pitch 14.84 m (latitude 48.5°).
- Yield of 1 kWp
- 1,002kWh/year
- Tilt
- 38°16° east of south
- 10 kW
- 10,024kWh/year
- Row pitch
- 14.84m · GCR 0.32
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Splai
The designer opens with this place’s coordinates, latitude 48.5° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 73 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
August: 118 kWh/kWp, December: 35 — 3.4 times less.
May: 106 against 124 in the oblast, 14.5% less.
| kWp | A year | August | December |
|---|---|---|---|
| 5 | 5,012 | 590 | 175 |
| 10 | 10,024 | 1,180 | 350 |
| 15 | 15,036 | 1,770 | 525 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Daruv8 km875 kWh/kWp
- Prochka14 km899 kWh/kWp
- Lopukhiv15 km1,036 kWh/kWp
- Nimetska Mokra17 km969 kWh/kWp
- Osmoloda17 km971 kWh/kWp
- Ruska Mokra18 km1,036 kWh/kWp
All places: Kaluskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.