Solar plant: site data
Solar power plant in Osmoloda, Kaluskyi Raion, Ivano-Frankivsk Oblast
Osmoloda: 971 kWh per kWp a year, tilt 36° 5° east of south (PVGIS). 11.5% below the oblast median (1,097). #160 of 162 in the rayon, #691 of 700 in the oblast.
Kalush, the rayon centre, is 49 km away. 730 m above sea level — above 500 m the DBN snow and wind are higher. 40 km away: Nadvirna, the nearest bigger centre, 1,085 — 10.5% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 59 km. 10.68 m between rows, pitch 14.55 m (latitude 48.6°).
- Yield of 1 kWp
- 971kWh/year
- Tilt
- 36°5° east of south
- 10 kW
- 9,712kWh/year
- Row pitch
- 14.55m · GCR 0.33
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Osmoloda
The designer opens with this place’s coordinates, latitude 48.6° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 59 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
August: 115 kWh/kWp, December: 29 — 4.0 times less.
December: 29 against 38 in the oblast, 23.7% less.
| kWp | A year | August | December |
|---|---|---|---|
| 5 | 4,856 | 575 | 145 |
| 10 | 9,712 | 1,150 | 290 |
| 15 | 14,568 | 1,725 | 435 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Kuzmynets4 km1,007 kWh/kWp
- Hrynkiv8 km1,040 kWh/kWp
- Daruv10 km875 kWh/kWp
- Lazy11 km1,040 kWh/kWp
- Babske13 km1,042 kWh/kWp
- Lypovytsia13 km1,030 kWh/kWp
All places: Kaluskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.