Solar plant: site data
Solar power plant in Kevelovo, Rakhivskyi Raion, Zakarpattia Oblast
Kevelovo: 1,033 kWh per kWp a year, tilt 37° 15° east of south (PVGIS). 9.5% below the oblast median (1,141). #26 of 36 in the rayon, #561 of 613 in the oblast.
Rakhiv, the rayon centre, is 22 km away. 693 m above sea level — above 500 m the DBN snow and wind are higher. 22 km away: Rakhiv, the nearest bigger centre, 1,068 — 3.3% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 82 km. 10.62 m between rows, pitch 14.44 m (latitude 48.2°).
- Yield of 1 kWp
- 1,033kWh/year
- Tilt
- 37°15° east of south
- 10 kW
- 10,327kWh/year
- Row pitch
- 14.44m · GCR 0.33
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Kevelovo
The designer opens with this place’s coordinates, latitude 48.2° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 82 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
August: 126 kWh/kWp, December: 35 — 3.6 times less.
January: 46 against 39 in the oblast, 17.9% more.
| kWp | A year | August | December |
|---|---|---|---|
| 5 | 5,164 | 630 | 175 |
| 10 | 10,327 | 1,260 | 350 |
| 15 | 15,491 | 1,890 | 525 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Surdok4 km971 kWh/kWp
- Yasinya5 km1,082 kWh/kWp
- Chorna Tysa8 km1,072 kWh/kWp
- Trostianets8 km1,074 kWh/kWp
- Lazeshchyna9 km1,065 kWh/kWp
- Kvasy9 km1,059 kWh/kWp
All places: Rakhivskyi RaionZakarpattia Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.