Poland: solar plant site data
Solar power plant in Konin, Poland: yield, tilt angle and row spacing
Konin: 1,062 kWh per kWp a year at the optimal tilt of 40°, 3° east of south (PVGIS). Exactly the median of the main cities of Poland (1,065). #47 of 87 main cities of Poland by yield. For comparison, Kyiv: 1,114 kWh/kWp — 4.6% less here.
Konin is in Greater Poland Voivodeship. Population 81,258 (GeoNames). 83 m above sea level. 53 km away: Kalisz, the nearest bigger city, 1,085 kWh/kWp — 2.1% less here. 15.57 m between rows, pitch 19.23 m, GCR 0.25 (latitude 52.2°).
- Yield of 1 kWp
- 1,062kWh/year
- Tilt
- 40°3° east of south
- 10 kW
- 10,623kWh/year
- Row pitch
- 19.23m · GCR 0.25
- Rank in the country
- 47of 87 cities
Ground frame designer
A ground frame for a solar plant: Konin
Latitude 52.2°: the tilt and the row pitch follow it. Enter the snow and wind for Poland in the designer, by the national annex to the Eurocode.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
June: 132 kWh/kWp, December: 28 — 4.7 times less.
December: 28 against the median of 32 for the main cities of Poland, 12.5% less.
| kWp | A year | June | December |
|---|---|---|---|
| 5 | 5,312 | 660 | 140 |
| 10 | 10,623 | 1,320 | 280 |
| 15 | 15,935 | 1,980 | 420 |
Snow and wind loads
Snow and wind loads for a site in Poland follow PN-EN 1991-1-3 (snow) and PN-EN 1991-1-4 (wind) with the Polish National Annex (NA). Solispec computes loads by the Ukrainian DBN V.1.2-2 only, so this page shows no snow or wind values for Poland: enter the characteristic values from these documents in the designer’s «Own snow S0» and «Own wind W0» fields.
The frame calculation for such a site is preliminary: before installation it must be checked by an engineer who works to the country’s standards.
Nearby cities
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation, population and divisions (changed)
- Where to take snow and wind loads from: PN-EN 1991-1-3 + NA, PN-EN 1991-1-4 + NA
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.