Solar plant: site data
Solar power plant in Prychil, Nadvirnianskyi Raion, Ivano-Frankivsk Oblast
Prychil: 988 kWh per kWp a year, tilt 36° 13° east of south (PVGIS). 10.0% below the oblast median (1,097). #53 of 58 in the rayon, #684 of 700 in the oblast.
Nadvirna, the rayon centre, is 32 km away. 753 m above sea level — above 500 m the DBN snow and wind are higher. 32 km away: Nadvirna, the nearest bigger centre, 1,085 — 9.0% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 63 km. 10.53 m between rows, pitch 14.40 m (latitude 48.5°).
- Yield of 1 kWp
- 988kWh/year
- Tilt
- 36°13° east of south
- 10 kW
- 9,875kWh/year
- Row pitch
- 14.40m · GCR 0.33
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Prychil
The designer opens with this place’s coordinates, latitude 48.5° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 63 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
August: 120 kWh/kWp, December: 25 — 4.8 times less.
December: 25 against 38 in the oblast, 34.2% less.
| kWp | A year | August | December |
|---|---|---|---|
| 5 | 4,938 | 600 | 125 |
| 10 | 9,875 | 1,200 | 250 |
| 15 | 14,813 | 1,800 | 375 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Kupene1 km1,001 kWh/kWp
- Bystrytsia1 km975 kWh/kWp
- Klympushi2 km1,011 kWh/kWp
- Salatruk2 km1,032 kWh/kWp
- Tersovane2 km999 kWh/kWp
- Zghary3 km1,027 kWh/kWp
All places: Nadvirnianskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.