Solar plant: site data
Solar power plant in Kupene, Nadvirnianskyi Raion, Ivano-Frankivsk Oblast
Kupene: 1,001 kWh per kWp a year, tilt 37° facing south (PVGIS). 8.8% below the oblast median (1,097). #50 of 58 in the rayon, #680 of 700 in the oblast.
Nadvirna, the rayon centre, is 33 km away. 823 m above sea level — above 500 m the DBN snow and wind are higher. 33 km away: Nadvirna, the nearest bigger centre, 1,085 — 7.8% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 64 km. 10.78 m between rows, pitch 14.60 m (latitude 48.5°).
- Yield of 1 kWp
- 1,001kWh/year
- Tilt
- 37°facing south
- 10 kW
- 10,006kWh/year
- Row pitch
- 14.60m · GCR 0.33
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Kupene
The designer opens with this place’s coordinates, latitude 48.5° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 64 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
August: 119 kWh/kWp, December: 30 — 4.0 times less.
December: 30 against 38 in the oblast, 21.1% less.
| kWp | A year | August | December |
|---|---|---|---|
| 5 | 5,003 | 595 | 150 |
| 10 | 10,006 | 1,190 | 300 |
| 15 | 15,009 | 1,785 | 450 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Prychil1 km988 kWh/kWp
- Zghary2 km1,027 kWh/kWp
- Klympushi2 km1,011 kWh/kWp
- Salatruk2 km1,032 kWh/kWp
- Bystrytsia2 km975 kWh/kWp
- Tersovane3 km999 kWh/kWp
All places: Nadvirnianskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.