Solar plant: site data
Solar power plant in Krasnyk, Verkhovynskyi Raion, Ivano-Frankivsk Oblast
Krasnyk: 1,061 kWh per kWp a year, tilt 40° 11° east of south (PVGIS). 3.3% below the oblast median (1,097). #21 of 41 in the rayon, #591 of 700 in the oblast.
Verkhovyna, the rayon centre, is 7 km away. 657 m above sea level — above 500 m the DBN snow and wind are higher. 7 km away: Verkhovyna, the nearest bigger centre, 1,074 — 1.2% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 87 km. 11.28 m between rows, pitch 14.94 m (latitude 48.1°).
- Yield of 1 kWp
- 1,061kWh/year
- Tilt
- 40°11° east of south
- 10 kW
- 10,612kWh/year
- Row pitch
- 14.94m · GCR 0.32
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Krasnyk
The designer opens with this place’s coordinates, latitude 48.1° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 87 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
July: 117 kWh/kWp, December: 49 — 2.4 times less.
December: 49 against 38 in the oblast, 28.9% more.
| kWp | A year | July | December |
|---|---|---|---|
| 5 | 5,306 | 585 | 245 |
| 10 | 10,612 | 1,170 | 490 |
| 15 | 15,918 | 1,755 | 735 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Iltsi2 km1,094 kWh/kWp
- Staische5 km1,096 kWh/kWp
- Topilche6 km939 kWh/kWp
- Bystrets6 km979 kWh/kWp
- Vipche6 km1,048 kWh/kWp
- Dzembronya6 km1,067 kWh/kWp
All places: Verkhovynskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.