Germany: solar plant site data
Solar power plant in Baden-Baden, Germany: yield, tilt angle and row spacing
Baden-Baden: 1,115 kWh per kWp a year at the optimal tilt of 38°, 2° east of south (PVGIS). 6.8% above the median of the main cities of Germany (1,045). #25 of 193 main cities of Germany by yield. For comparison, Kyiv: the same 1,114 kWh/kWp.
Baden-Baden is in Baden-Württemberg. Population 56,881 (GeoNames). 169 m above sea level. 30 km away: Karlsruhe, the nearest bigger city, 1,135 kWh/kWp — 1.7% less here. 11.28 m between rows, pitch 15.05 m, GCR 0.32 (latitude 48.8°).
- Yield of 1 kWp
- 1,115kWh/year
- Tilt
- 38°2° east of south
- 10 kW
- 11,154kWh/year
- Row pitch
- 15.05m · GCR 0.32
- Rank in the country
- 25of 193 cities
Ground frame designer
A ground frame for a solar plant: Baden-Baden
Latitude 48.8°: the tilt and the row pitch follow it. Enter the snow and wind for Germany in the designer, by the national annex to the Eurocode.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
July: 132 kWh/kWp, December: 37 — 3.6 times less.
January: 44 against the median of 35 for the main cities of Germany, 25.7% more.
| kWp | A year | July | December |
|---|---|---|---|
| 5 | 5,577 | 660 | 185 |
| 10 | 11,154 | 1,320 | 370 |
| 15 | 16,731 | 1,980 | 555 |
Snow and wind loads
Snow and wind loads for a site in Germany follow DIN EN 1991-1-3/NA (snow load zone, Schneelastzone) and DIN EN 1991-1-4/NA (wind zone, Windzone). Solispec computes loads by the Ukrainian DBN V.1.2-2 only, so this page shows no snow or wind values for Germany: enter the characteristic values from these documents in the designer’s «Own snow S0» and «Own wind W0» fields.
The frame calculation for such a site is preliminary: before installation it must be checked by an engineer who works to the country’s standards.
Nearby cities
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation, population and divisions (changed)
- Where to take snow and wind loads from: DIN EN 1991-1-3/NA, DIN EN 1991-1-4/NA
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.