REC
Ground frame for 24 REC Alpha Pure-RX REC470AA Pure-RX (HJT) panels (2×12)
2 rows of 12 panels, 11.28 kW. The Solispec engine chose the profiles, the frame pitch and the footings for three snow and wind zones: Kherson has the lowest load of the regional centres, Cherkasy the median, Chernihiv the highest.
- Power
- 11.28kW
- Steel
- 387.2kg
- Posts
- 14
- Bolts
- 164
- Materials
- 52,042₴
- Yield
- 12,845kWh/year
Figures for the median zone (Cherkasy); all three zones are in the table below.
Ground frame designer
Open this frame in the builder
The builder opens with the REC Alpha Pure-RX REC470AA Pure-RX (HJT) panel and the 2 × 12 layout; site — Cherkasy. Change the site, the tilt or the profiles and the checks and estimate are recalculated.
- No sign-up
- Snow and wind check
- Drawings and estimate
Three snow and wind zones
The same table designed for three regional centres: with the lowest, the median and the highest combined snow and wind load under DBN V.1.2-2:2006. For another site, open the frame in the builder.
| Parameter | Low loadKherson · S₀ 760 · W₀ 480 | Median loadCherkasy · S₀ 1,520 · W₀ 420 | High loadChernihiv · S₀ 1,720 · W₀ 410 |
|---|---|---|---|
| Posts | Tube 60×60×2 | Tube 60×60×2 | Tube 60×60×2 |
| Rafters | C-channel 60×40×2 | C-channel 60×40×2 | C-channel 60×40×2 |
| Purlins and braces | C-channel 60×40×2 | C-channel 60×40×2 | C-channel 60×40×2 |
| Frames | 6 frames, pitch up to 2,800 mm | 7 frames, pitch up to 2,350 mm | 7 frames, pitch up to 2,350 mm |
| Posts | 12 | 14 | 14 |
| Footings (bored concrete) | 12 pcs, Ø400 mm, depth 1,100 mm | 14 pcs, Ø300 mm, depth 1,100 mm | 14 pcs, Ø300 mm, depth 1,300 mm |
| Concrete | 1.83 m³ | 1.20 m³ | 1.42 m³ |
| Tilt | 30° | 30° | 30° |
| Panel bottom / post top | 600 / 1,814 mm | 600 / 1,814 mm | 600 / 1,814 mm |
| Panel field size | 14,820 × 2,282 mm | 14,820 × 2,282 mm | 14,820 × 2,282 mm |
| Row spacing between tables (no shade on 21 December) | 7,800 mm at noon · 8,770 mm ±2 h | 8,640 mm at noon · 9,980 mm ±2 h | 9,470 mm at noon · 11,260 mm ±2 h |
| Steel | 362.1 kg | 387.2 kg | 397.2 kg |
| Bolts | M10 — 102, M8 — 52 | M10 — 112, M8 — 52 | M10 — 112, M8 — 52 |
| Panel clamps | end 8, middle 44 | end 8, middle 44 | end 8, middle 44 |
| Materials | 51,001 UAH | 52,042 UAH | 53,186 UAH |
| With installation and delivery | 80,361 UAH | 81,352 UAH | 82,496 UAH |
| Per 1 kW | 7,124 UAH/kW | 7,212 UAH/kW | 7,313 UAH/kW |
| Yield | 1,266 kWh/kW · 14,285 kWh/year | 1,139 kWh/kW · 12,845 kWh/year | 1,043 kWh/kW · 11,766 kWh/year |
| Strength σ/fy | 90% | 88% | 94% |
| Deflection / (L/200) | 100% | 81% | 87% |
| Rafter strength | 70% | 81% | 87% |
| Post utilisation | 14% | 17% | 18% |
| Utilisation | 93% | 96% | 79% |
| Depth vs frost depth | ok | ok | ok |
| Checks overall | with a caution | with a caution | with a caution |
Checks and cautions
Member utilisation as the engine computes it. Cautions are checks that pass, but with a small margin.
- Max. frame pitch, mmThe purlins between the frames are used above 80 % (strength or deflection): the structure passes, but the margin is small. A shorter frame pitch or a deeper purlin gives more margin.Kherson: Frame spacing 2 800 mm, 6 frames. Purlin C-channel 60×40×2: strength 90%, deflection 100% of L/200 (snow on panel 489 Pa).Cherkasy: Frame spacing 2 350 mm, 7 frames. Purlin C-channel 60×40×2: strength 88%, deflection 81% of L/200 (snow on panel 977 Pa).Chernihiv: Frame spacing 2 350 mm, 7 frames. Purlin C-channel 60×40×2: strength 94%, deflection 87% of L/200 (snow on panel 1 106 Pa).
- Embedment, mmThe footing resists wind uplift at above 80 % utilisation, or it is shallower than the frost depth. The soil resistance in the calculation is an estimate — check the soil on site.Kherson: Foundation Ø400 × 1 100: 0.138 m³ of concrete per post. Wind uplift on the front post ≈ 12.4 kN (with γ=1.5) vs ≈ 13.4 kN (concrete weight + soil friction, estimate) → 93%.Cherkasy: Foundation Ø300 × 1 100: 0.078 m³ of concrete per post. Wind uplift on the front post ≈ 9.1 kN (with γ=1.5) vs ≈ 9.5 kN (concrete weight + soil friction, estimate) → 96%.
- Rafter profileThe rafter is used above 80 %, or the frame's posts stand far apart: the structure passes, but the margin is small.Cherkasy: Rafter C-channel 60×40×2: span between posts 1 691, cantilever 612 mm → strength 81%.Chernihiv: Rafter C-channel 60×40×2: span between posts 1 691, cantilever 612 mm → strength 87%.
Bill of materials
The parts of one table for the median zone (Cherkasy): mark, name, profile, cut length, quantity.
| Mark | Part | Profile | Length, mm | Quantity |
|---|---|---|---|---|
| П1 | Front post | Tube 60×60×2 | 2,093 | 7 |
| П2 | Rear post | Tube 60×60×2 | 2,939 | 7 |
| Кр1 | Rafter (inclined beam) | C-channel 60×40×2 | 2,916 | 7 |
| Пк1 | Frame strut | C-channel 60×40×2 | 1,406 | 7 |
| Х1 | Longitudinal brace (cross) | C-channel 60×40×2 | 2,651 | 4 |
| Р1 | Purlin (rail) | C-channel 60×40×2 | 6,000 | 2 |
| Р2 | Purlin (rail) | C-channel 60×40×2 | 6,000 | 2 |
| Р3 | Purlin (rail) | C-channel 60×40×2 | 6,000 | 2 |
| Р4 | Purlin (rail) | C-channel 60×40×2 | 6,000 | 2 |
| Р5 | Purlin (rail) | C-channel 60×40×2 | 2,820 | 2 |
| Р6 | Purlin (rail) | C-channel 60×40×2 | 2,820 | 2 |
| — | Bolt M10×25 set · purlins, braces, connectors | — | — | 34 |
| — | Bolt M10×80 set · purlin to rafter | — | — | 28 |
| — | Bolt M10×90 set · strut to post — through spacer inserts | — | — | 7 |
| — | Bolt M10×130 set · post–rafter — through spacer inserts | — | — | 28 |
| — | Bolt M10×140 set · strut to rafter — through spacer inserts | — | — | 7 |
| — | Bolt M10×150 set · brace to post — through spacer inserts | — | — | 8 |
| — | End clamp 30 mm | — | — | 8 |
| — | Mid clamp (30–40 mm) | — | — | 44 |
| — | Bolt M8×50 + channel nut | — | — | 52 |
| — | Concrete for 14 posts, Ø300×1100 | — | — | 1.20 m³ |
Profile cutting
25 bars of 6,000 mm, 135.4 m of profile in total.
- Tube 60×60×27 bars
- C-channel 60×40×218 bars
Estimated cost
The engine's materials estimate for the median zone (Cherkasy).
- Materials
- 52,042₴
- With installation and delivery
- 81,352₴
- Per 1 kW
- 7,212UAH/kW
The engine's estimate has 23 lines; the full list is in the builder. Prices are the typical market prices built into the Solispec engine, as of 06.10.2026; no margin, no VAT.
Yield
Yield: 1,139 kWh per 1 kW a year, ≈ 12,845 kWh a year in total (median zone, Cherkasy; tilt 30°, the optimum for the latitude is 35.3°).
A preliminary calculation; a design needs an engineer's check. Snow and wind per DBN V.1.2-2:2006 for the regional centre; profiles, footings and estimate by the Solispec engine 0.12.0.