Solar plant: site data
Solar power plant in Pryslip, Khustskyi Raion, Zakarpattia Oblast
Pryslip: 1,008 kWh per kWp a year, tilt 36° 3° east of south (PVGIS). 11.7% below the oblast median (1,141). #128 of 145 in the rayon, #582 of 613 in the oblast.
Khust, the rayon centre, is 60 km away. 673 m above sea level — above 500 m the DBN snow and wind are higher. 60 km away: Khust, the nearest bigger centre, 978 — 3.0% more here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 90 km. 10.71 m between rows, pitch 14.58 m (latitude 48.7°).
- Yield of 1 kWp
- 1,008kWh/year
- Tilt
- 36°3° east of south
- 10 kW
- 10,075kWh/year
- Row pitch
- 14.58m · GCR 0.33
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Pryslip
The designer opens with this place’s coordinates, latitude 48.7° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 90 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
August: 126 kWh/kWp, December: 27 — 4.7 times less.
November: 43 against 53 in the oblast, 18.9% less.
| kWp | A year | August | December |
|---|---|---|---|
| 5 | 5,038 | 630 | 135 |
| 10 | 10,075 | 1,260 | 270 |
| 15 | 15,113 | 1,890 | 405 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Zavyika3 km1,005 kWh/kWp
- Novoselytsia4 km1,028 kWh/kWp
- Titkivtsi4 km949 kWh/kWp
- Lopushne5 km1,017 kWh/kWp
- Torun5 km950 kWh/kWp
- Verkhnii Bystryi7 km1,015 kWh/kWp
All places: Khustskyi RaionZakarpattia Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.