Poland: solar plant site data
Solar power plant in Koszalin, Poland: yield, tilt angle and row spacing
Koszalin: 1,019 kWh per kWp a year at the optimal tilt of 40°, facing south (PVGIS). 4.3% below the median of the main cities of Poland (1,065). #80 of 87 main cities of Poland by yield. For comparison, Kyiv: 1,114 kWh/kWp — 8.6% less here.
Koszalin is in West Pomeranian Voivodeship. Population 107,450 (GeoNames). 30 m above sea level. 136 km away: Szczecin, the nearest bigger city, 1,007 kWh/kWp — 1.1% more here. 18.97 m between rows, pitch 22.63 m, GCR 0.21 (latitude 54.2°).
- Yield of 1 kWp
- 1,019kWh/year
- Tilt
- 40°facing south
- 10 kW
- 10,187kWh/year
- Row pitch
- 22.63m · GCR 0.21
- Rank in the country
- 80of 87 cities
Ground frame designer
A ground frame for a solar plant: Koszalin
Latitude 54.2°: the tilt and the row pitch follow it. Enter the snow and wind for Poland in the designer, by the national annex to the Eurocode.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
May: 134 kWh/kWp, December: 20 — 6.7 times less.
December: 20 against the median of 32 for the main cities of Poland, 37.5% less.
| kWp | A year | May | December |
|---|---|---|---|
| 5 | 5,094 | 670 | 100 |
| 10 | 10,187 | 1,340 | 200 |
| 15 | 15,281 | 2,010 | 300 |
Snow and wind loads
Snow and wind loads for a site in Poland follow PN-EN 1991-1-3 (snow) and PN-EN 1991-1-4 (wind) with the Polish National Annex (NA). Solispec computes loads by the Ukrainian DBN V.1.2-2 only, so this page shows no snow or wind values for Poland: enter the characteristic values from these documents in the designer’s «Own snow S0» and «Own wind W0» fields.
The frame calculation for such a site is preliminary: before installation it must be checked by an engineer who works to the country’s standards.
Nearby cities
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation, population and divisions (changed)
- Where to take snow and wind loads from: PN-EN 1991-1-3 + NA, PN-EN 1991-1-4 + NA
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.