Germany: solar plant site data
Solar power plant in Neu-Ulm, Germany: yield, tilt angle and row spacing
Neu-Ulm: 1,127 kWh per kWp a year at the optimal tilt of 37°, 2° west of south (PVGIS). 7.9% above the median of the main cities of Germany (1,045). #16 of 193 main cities of Germany by yield. For comparison, Kyiv: 1,114 kWh/kWp — 1.2% more here.
Neu-Ulm is in Bavaria. Population 51,389 (GeoNames). 474 m above sea level. 2 km away: Ulm, the nearest bigger city, 1,115 kWh/kWp — 1.1% more here. 10.74 m between rows, pitch 14.56 m, GCR 0.33 (latitude 48.4°).
- Yield of 1 kWp
- 1,127kWh/year
- Tilt
- 37°2° west of south
- 10 kW
- 11,271kWh/year
- Row pitch
- 14.56m · GCR 0.33
- Rank in the country
- 16of 193 cities
Ground frame designer
A ground frame for a solar plant: Neu-Ulm
Latitude 48.4°: the tilt and the row pitch follow it. Enter the snow and wind for Germany in the designer, by the national annex to the Eurocode.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
July: 135 kWh/kWp, December: 38 — 3.6 times less.
December: 38 against the median of 30 for the main cities of Germany, 26.7% more.
| kWp | A year | July | December |
|---|---|---|---|
| 5 | 5,636 | 675 | 190 |
| 10 | 11,271 | 1,350 | 380 |
| 15 | 16,907 | 2,025 | 570 |
Snow and wind loads
Snow and wind loads for a site in Germany follow DIN EN 1991-1-3/NA (snow load zone, Schneelastzone) and DIN EN 1991-1-4/NA (wind zone, Windzone). Solispec computes loads by the Ukrainian DBN V.1.2-2 only, so this page shows no snow or wind values for Germany: enter the characteristic values from these documents in the designer’s «Own snow S0» and «Own wind W0» fields.
The frame calculation for such a site is preliminary: before installation it must be checked by an engineer who works to the country’s standards.
Nearby cities
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation, population and divisions (changed)
- Where to take snow and wind loads from: DIN EN 1991-1-3/NA, DIN EN 1991-1-4/NA
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.