Germany: solar plant site data
Solar power plant in Heidenheim, Germany: yield, tilt angle and row spacing
Heidenheim: 1,090 kWh per kWp a year at the optimal tilt of 37°, 1° east of south (PVGIS). 4.3% above the median of the main cities of Germany (1,045). #45 of 193 main cities of Germany by yield. For comparison, Kyiv: 1,114 kWh/kWp — 2.2% less here.
Heidenheim is in Baden-Württemberg. Population 50,067 (GeoNames). 494 m above sea level. 18 km away: Aalen, the nearest bigger city, the same 1,092 kWh/kWp. 10.96 m between rows, pitch 14.78 m, GCR 0.32 (latitude 48.7°).
- Yield of 1 kWp
- 1,090kWh/year
- Tilt
- 37°1° east of south
- 10 kW
- 10,895kWh/year
- Row pitch
- 14.78m · GCR 0.32
- Rank in the country
- 45of 193 cities
Ground frame designer
A ground frame for a solar plant: Heidenheim
Latitude 48.7°: the tilt and the row pitch follow it. Enter the snow and wind for Germany in the designer, by the national annex to the Eurocode.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
July: 132 kWh/kWp, December: 37 — 3.6 times less.
December: 37 against the median of 30 for the main cities of Germany, 23.3% more.
| kWp | A year | July | December |
|---|---|---|---|
| 5 | 5,448 | 660 | 185 |
| 10 | 10,895 | 1,320 | 370 |
| 15 | 16,343 | 1,980 | 555 |
Snow and wind loads
Snow and wind loads for a site in Germany follow DIN EN 1991-1-3/NA (snow load zone, Schneelastzone) and DIN EN 1991-1-4/NA (wind zone, Windzone). Solispec computes loads by the Ukrainian DBN V.1.2-2 only, so this page shows no snow or wind values for Germany: enter the characteristic values from these documents in the designer’s «Own snow S0» and «Own wind W0» fields.
The frame calculation for such a site is preliminary: before installation it must be checked by an engineer who works to the country’s standards.
Nearby cities
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation, population and divisions (changed)
- Where to take snow and wind loads from: DIN EN 1991-1-3/NA, DIN EN 1991-1-4/NA
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.