Germany: solar plant site data
Solar power plant in Gera, Germany: yield, tilt angle and row spacing
Gera: 1,068 kWh per kWp a year at the optimal tilt of 39°, 2° east of south (PVGIS). 2.3% above the median of the main cities of Germany (1,045). #63 of 193 main cities of Germany by yield. For comparison, Kyiv: 1,114 kWh/kWp — 4.1% less here.
Gera is in Thuringia. Population 104,659 (GeoNames). 203 m above sea level. 35 km away: Jena, the nearest bigger city, 1,056 kWh/kWp — 1.1% more here. 13.55 m between rows, pitch 17.27 m, GCR 0.28 (latitude 50.9°).
- Yield of 1 kWp
- 1,068kWh/year
- Tilt
- 39°2° east of south
- 10 kW
- 10,682kWh/year
- Row pitch
- 17.27m · GCR 0.28
- Rank in the country
- 63of 193 cities
Ground frame designer
A ground frame for a solar plant: Gera
Latitude 50.9°: the tilt and the row pitch follow it. Enter the snow and wind for Germany in the designer, by the national annex to the Eurocode.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
May: 129 kWh/kWp, January: 37 — 3.5 times less.
December: 37 against the median of 30 for the main cities of Germany, 23.3% more.
| kWp | A year | May | January |
|---|---|---|---|
| 5 | 5,341 | 645 | 185 |
| 10 | 10,682 | 1,290 | 370 |
| 15 | 16,023 | 1,935 | 555 |
Snow and wind loads
Snow and wind loads for a site in Germany follow DIN EN 1991-1-3/NA (snow load zone, Schneelastzone) and DIN EN 1991-1-4/NA (wind zone, Windzone). Solispec computes loads by the Ukrainian DBN V.1.2-2 only, so this page shows no snow or wind values for Germany: enter the characteristic values from these documents in the designer’s «Own snow S0» and «Own wind W0» fields.
The frame calculation for such a site is preliminary: before installation it must be checked by an engineer who works to the country’s standards.
Nearby cities
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation, population and divisions (changed)
- Where to take snow and wind loads from: DIN EN 1991-1-3/NA, DIN EN 1991-1-4/NA
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.