Seraphim
Ground frame for 5 Seraphim Sable SRP-440-BTD-BG panels (1×5)
1 row of 5 panels, 2.20 kW. The Solispec engine chose the profiles, the frame pitch and the footings for three snow and wind zones: Kherson has the lowest load of the regional centres, Cherkasy the median, Chernihiv the highest.
- Power
- 2.20kW
- Steel
- 135.9kg
- Posts
- 8
- Bolts
- 54
- Materials
- 18,670₴
- Yield
- 2,505kWh/year
Figures for the median zone (Cherkasy); all three zones are in the table below.
Ground frame designer
Open this frame in the builder
The builder opens with the Seraphim Sable SRP-440-BTD-BG panel and the 1 × 5 layout; site — Cherkasy. Change the site, the tilt or the profiles and the checks and estimate are recalculated.
- No sign-up
- Snow and wind check
- Drawings and estimate
Three snow and wind zones
The same table designed for three regional centres: with the lowest, the median and the highest combined snow and wind load under DBN V.1.2-2:2006. For another site, open the frame in the builder.
| Parameter | Low loadKherson · S₀ 760 · W₀ 480 | Median loadCherkasy · S₀ 1,520 · W₀ 420 | High loadChernihiv · S₀ 1,720 · W₀ 410 |
|---|---|---|---|
| Posts | Tube 60×60×2 | Tube 60×60×2 | Tube 60×60×2 |
| Rafters | Tube 60×60×2 | Tube 60×60×2 | Tube 60×60×2 |
| Purlins and braces | C-channel 41×41×2.5 | C-channel 41×41×2.5 | C-channel 41×41×2.5 |
| Frames | 4 frames, pitch up to 1,780 mm | 4 frames, pitch up to 1,780 mm | 4 frames, pitch up to 1,780 mm |
| Posts | 8 | 8 | 8 |
| Footings (bored concrete) | 8 pcs, Ø300 mm, depth 900 mm | 8 pcs, Ø300 mm, depth 1,100 mm | 8 pcs, Ø300 mm, depth 1,300 mm |
| Concrete | 0.56 m³ | 0.68 m³ | 0.81 m³ |
| Tilt | 30° | 30° | 30° |
| Panel bottom / post top | 600 / 1,138 mm | 600 / 1,138 mm | 600 / 1,138 mm |
| Panel field size | 5,890 × 1,073 mm | 5,890 × 1,073 mm | 5,890 × 1,073 mm |
| Row spacing between tables (no shade on 21 December) | 3,870 mm at noon · 4,350 mm ±2 h | 4,280 mm at noon · 4,950 mm ±2 h | 4,700 mm at noon · 5,580 mm ±2 h |
| Steel | 130.1 kg | 135.9 kg | 141.6 kg |
| Bolts | M10 — 42, M8 — 12 | M10 — 42, M8 — 12 | M10 — 42, M8 — 12 |
| Panel clamps | end 4, middle 8 | end 4, middle 8 | end 4, middle 8 |
| Materials | 18,046 UAH | 18,670 UAH | 20,592 UAH |
| With installation and delivery | 24,986 UAH | 25,610 UAH | 27,532 UAH |
| Per 1 kW | 11,357 UAH/kW | 11,641 UAH/kW | 12,515 UAH/kW |
| Yield | 1,266 kWh/kW · 2,786 kWh/year | 1,139 kWh/kW · 2,505 kWh/year | 1,043 kWh/kW · 2,295 kWh/year |
| Strength σ/fy | 64% | 89% | 95% |
| Deflection / (L/200) | 56% | 78% | 84% |
| Rafter strength | 4% | 6% | 7% |
| Post utilisation | 3% | 5% | 5% |
| Utilisation | 47% | 34% | 28% |
| Depth vs frost depth | ok | ok | ok |
| Checks overall | passes | with a caution | with a caution |
Checks and cautions
Member utilisation as the engine computes it. Cautions are checks that pass, but with a small margin.
- Max. frame pitch, mmThe purlins between the frames are used above 80 % (strength or deflection): the structure passes, but the margin is small. A shorter frame pitch or a deeper purlin gives more margin.Cherkasy: Frame spacing 1 780 mm, 4 frames. Purlin C-channel 41×41×2.5: strength 89%, deflection 78% of L/200 (snow on panel 977 Pa).Chernihiv: Frame spacing 1 780 mm, 4 frames. Purlin C-channel 41×41×2.5: strength 95%, deflection 84% of L/200 (snow on panel 1 106 Pa).
Bill of materials
The parts of one table for the median zone (Cherkasy): mark, name, profile, cut length, quantity.
| Mark | Part | Profile | Length, mm | Quantity |
|---|---|---|---|---|
| П1 | Front post | Tube 60×60×2 | 1,926 | 4 |
| П2 | Rear post | Tube 60×60×2 | 2,263 | 4 |
| Кр1 | Rafter (inclined beam) | Tube 60×60×2 | 1,162 | 4 |
| Пк1 | Frame strut | C-channel 41×41×2.5 | 826 | 4 |
| Х1 | Longitudinal brace (cross) | C-channel 41×41×2.5 | 1,883 | 4 |
| Р1 | Purlin (rail) | C-channel 41×41×2.5 | 5,890 | 2 |
| — | Bolt M10×140 / M10×80 set · frame and struts / purlins, braces, connectors | — | — | 30 |
| — | Bolt M10×110 set · brace to post — through spacer inserts | — | — | 4 |
| — | Bolt M10×150 set · strut to rafter — through spacer inserts | — | — | 4 |
| — | Bolt M10×160 set · brace to post — through spacer inserts | — | — | 4 |
| — | End clamp 30 mm | — | — | 4 |
| — | Mid clamp (30–40 mm) | — | — | 8 |
| — | Bolt M8×50 + channel nut | — | — | 12 |
| — | Concrete for 8 posts, Ø300×1100 | — | — | 0.68 m³ |
Profile cutting
8 bars of 6,000 mm, 44.0 m of profile in total.
- Tube 60×60×24 bars
- C-channel 41×41×2.54 bars
Estimated cost
The engine's materials estimate for the median zone (Cherkasy).
- Materials
- 18,670₴
- With installation and delivery
- 25,610₴
- Per 1 kW
- 11,641UAH/kW
Prices are the typical market prices built into the Solispec engine, as of 06.10.2026; no margin, no VAT.
All 21 lines of the engine's estimate, with prices
| Item | Quantity | Price, UAH | Sum, UAH |
|---|---|---|---|
| Tube 60×60×2, stock length 6 000 mm | 4 bar | 210 | 5,040 |
| C-channel 41×41×2.5, stock length 6 000 mm | 4 bar | 200 | 4,800 |
| Bolt M10×140 cl. 8.8 set — frame, struts | 25 pcs | 22 | 550 |
| Bolt M10×80 cl. 8.8 set — purlins, braces, connectors | 10 pcs | 22 | 220 |
| Bolt M10×110 cl. 8.8 set — brace to post — through spacer inserts | 4 pcs | 27 | 108 |
| Bolt M10×150 cl. 8.8 set — strut to rafter — through spacer inserts | 4 pcs | 27 | 108 |
| Bolt M10×160 cl. 8.8 set — brace to post — through spacer inserts | 4 pcs | 27 | 108 |
| End clamp 30 mm | 4 pcs | 35 | 140 |
| Mid clamp (30–40 mm) | 8 pcs | 32 | 256 |
| Bolt M8×50 A2 + spring channel nut M8 | 14 pcs | 14 | 196 |
| Post base anchor pin (M10 / rebar Ø12) | 8 pcs | 20 | 160 |
| Borehole casing (roofing felt / PVC, 300 mm) | 8 pcs | 60 | 480 |
| Crushed stone 20–40 for the bottom of the boreholes | 0.06 m³ | 900 | 54 |
| Earth electrode: 2 rods Ø16×1.5 m + strip 40×4 | 1 set | 1,500 | 1,500 |
| Wire PV-3 6 mm² green-yellow | 19 m | 35 | 665 |
| Module earthing clip (under the clamp) | 5 pcs | 20 | 100 |
| Cable clip, stainless | 15 pcs | 5 | 75 |
| Zinc paint / cold galvanising spray 400 ml | 1 pcs | 350 | 350 |
| Concrete M200 for posts | 0.68 m³ | 3,800 | 2,584 |
| Rebar Ø10 (4 bars per post) | 42 m | 28 | 1,176 |
| Spacer inserts / packs — pieces of the same profile (from offcuts): 4 × 71 mm, 4 × 70 mm, 4 × 30 mm, 4 × 10 mm | 16 pcs | 0 | 0 |
| Materials | 18,670 | ||
Yield
Yield: 1,139 kWh per 1 kW a year, ≈ 2,505 kWh a year in total (median zone, Cherkasy; tilt 30°, the optimum for the latitude is 35.3°).
A preliminary calculation; a design needs an engineer's check. Snow and wind per DBN V.1.2-2:2006 for the regional centre; profiles, footings and estimate by the Solispec engine 0.12.0.