Solar plant: site data
Solar power plant in Mel’niki, Ivano-Frankivskyi Raion, Ivano-Frankivsk Oblast
Mel’niki: 1,112 kWh per kWp a year, tilt 38° facing south (PVGIS). 1.4% above the oblast median (1,097). #28 of 244 in the rayon, #173 of 700 in the oblast.
Ivano-Frankivsk, the rayon centre, is 16 km away. 297 m above sea level. 15 km away: Bohorodchany, the nearest bigger centre, 1,101 — 1.0% more here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 15 km. 11.29 m between rows, pitch 15.06 m (latitude 48.8°).
- Yield of 1 kWp
- 1,112kWh/year
- Tilt
- 38°facing south
- 10 kW
- 11,123kWh/year
- Row pitch
- 15.06m · GCR 0.32
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Mel’niki
The designer opens with this place’s coordinates, latitude 48.8° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 15 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
July: 133 kWh/kWp, December: 40 — 3.3 times less.
December: 40 against 38 in the oblast, 5.3% more.
| kWp | A year | July | December |
|---|---|---|---|
| 5 | 5,562 | 665 | 200 |
| 10 | 11,123 | 1,330 | 400 |
| 15 | 16,685 | 1,995 | 600 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Nova Lypivka2 km1,114 kWh/kWp
- Lypivka3 km1,115 kWh/kWp
- Bratkivtsi3 km1,107 kWh/kWp
- Kaminne3 km1,112 kWh/kWp
- Tysmenychany5 km1,110 kWh/kWp
- Vynohrad5 km1,111 kWh/kWp
All places: Ivano-Frankivskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.