Trina
Ground frame for 12 Trina Vertex S+ TSM-440NEG9RC.27 panels (2×6)
2 rows of 6 panels, 5.28 kW. The Solispec engine chose the profiles, the frame pitch and the footings for three snow and wind zones: Kherson has the lowest load of the regional centres, Cherkasy the median, Chernihiv the highest.
- Power
- 5.28kW
- Steel
- 229.4kg
- Posts
- 8
- Bolts
- 94
- Materials
- 29,439₴
- Yield
- 6,013kWh/year
Figures for the median zone (Cherkasy); all three zones are in the table below.
Ground frame designer
Open this frame in the builder
The builder opens with the Trina Vertex S+ TSM-440NEG9RC.27 panel and the 2 × 6 layout; site — Cherkasy. Change the site, the tilt or the profiles and the checks and estimate are recalculated.
- No sign-up
- Snow and wind check
- Drawings and estimate
Three snow and wind zones
The same table designed for three regional centres: with the lowest, the median and the highest combined snow and wind load under DBN V.1.2-2:2006. For another site, open the frame in the builder.
| Parameter | Low loadKherson · S₀ 760 · W₀ 480 | Median loadCherkasy · S₀ 1,520 · W₀ 420 | High loadChernihiv · S₀ 1,720 · W₀ 410 |
|---|---|---|---|
| Posts | Tube 60×60×2 | Tube 60×60×2 | Tube 60×60×2 |
| Rafters | Tube 60×60×2 | Tube 60×60×2 | Tube 60×60×2 |
| Purlins and braces | C-channel 41×41×2.5 | C-channel 60×40×2 | C-channel 60×40×2 |
| Frames | 5 frames, pitch up to 1,640 mm | 4 frames, pitch up to 2,130 mm | 4 frames, pitch up to 2,130 mm |
| Posts | 10 | 8 | 8 |
| Footings (bored concrete) | 10 pcs, Ø300 mm, depth 900 mm | 8 pcs, Ø300 mm, depth 1,100 mm | 8 pcs, Ø300 mm, depth 1,300 mm |
| Concrete | 0.70 m³ | 0.68 m³ | 0.81 m³ |
| Tilt | 30° | 30° | 30° |
| Panel bottom / post top | 600 / 1,854 mm | 600 / 1,838 mm | 600 / 1,838 mm |
| Panel field size | 7,044 × 2,314 mm | 7,044 × 2,324 mm | 7,044 × 2,324 mm |
| Row spacing between tables (no shade on 21 December) | 7,950 mm at noon · 8,940 mm ±2 h | 8,810 mm at noon · 10,180 mm ±2 h | 9,660 mm at noon · 11,480 mm ±2 h |
| Steel | 251.3 kg | 229.4 kg | 235.1 kg |
| Bolts | M10 — 76, M8 — 28 | M10 — 66, M8 — 28 | M10 — 66, M8 — 28 |
| Panel clamps | end 8, middle 20 | end 8, middle 20 | end 8, middle 20 |
| Materials | 30,227 UAH | 29,439 UAH | 30,101 UAH |
| With installation and delivery | 44,862 UAH | 44,101 UAH | 44,763 UAH |
| Per 1 kW | 8,497 UAH/kW | 8,352 UAH/kW | 8,478 UAH/kW |
| Yield | 1,266 kWh/kW · 6,687 kWh/year | 1,139 kWh/kW · 6,013 kWh/year | 1,043 kWh/kW · 5,508 kWh/year |
| Strength σ/fy | 57% | 74% | 79% |
| Deflection / (L/200) | 46% | 62% | 66% |
| Rafter strength | 28% | 50% | 53% |
| Post utilisation | 9% | 15% | 17% |
| Utilisation | 96% | 89% | 74% |
| Depth vs frost depth | ok | ok | ok |
| Checks overall | with a caution | with a caution | passes |
Checks and cautions
Member utilisation as the engine computes it. Cautions are checks that pass, but with a small margin.
- Embedment, mmThe footing resists wind uplift at above 80 % utilisation, or it is shallower than the frost depth. The soil resistance in the calculation is an estimate — check the soil on site.Kherson: Foundation Ø300 × 900: 0.064 m³ of concrete per post. Wind uplift on the front post ≈ 7.4 kN (with γ=1.5) vs ≈ 7.7 kN (concrete weight + soil friction, estimate) → 96%.Cherkasy: Foundation Ø300 × 1 100: 0.078 m³ of concrete per post. Wind uplift on the front post ≈ 8.4 kN (with γ=1.5) vs ≈ 9.5 kN (concrete weight + soil friction, estimate) → 89%.
Bill of materials
The parts of one table for the median zone (Cherkasy): mark, name, profile, cut length, quantity.
| Mark | Part | Profile | Length, mm | Quantity |
|---|---|---|---|---|
| П1 | Front post | Tube 60×60×2 | 2,103 | 4 |
| П2 | Rear post | Tube 60×60×2 | 2,963 | 4 |
| Кр1 | Rafter (inclined beam) | Tube 60×60×2 | 2,964 | 4 |
| Пк1 | Frame strut | C-channel 60×40×2 | 1,427 | 4 |
| Х1 | Longitudinal brace (cross) | C-channel 60×40×2 | 2,465 | 4 |
| Р1 | Purlin (rail) | C-channel 60×40×2 | 6,000 | 2 |
| Р2 | Purlin (rail) | C-channel 60×40×2 | 6,000 | 2 |
| Р3 | Purlin (rail) | C-channel 60×40×2 | 1,044 | 2 |
| Р4 | Purlin (rail) | C-channel 60×40×2 | 1,044 | 2 |
| — | Bolt M10×140 / M10×80 set · frame and struts / purlins, braces, connectors | — | — | 54 |
| — | Bolt M10×150 set · brace to post, strut to rafter — through spacer inserts | — | — | 12 |
| — | End clamp 30 mm | — | — | 8 |
| — | Mid clamp (30–40 mm) | — | — | 20 |
| — | Bolt M8×50 + channel nut | — | — | 28 |
| — | Concrete for 8 posts, Ø300×1100 | — | — | 0.68 m³ |
Profile cutting
14 bars of 6,000 mm, 75.9 m of profile in total.
- Tube 60×60×26 bars
- C-channel 60×40×28 bars
Estimated cost
The engine's materials estimate for the median zone (Cherkasy).
- Materials
- 29,439₴
- With installation and delivery
- 44,101₴
- Per 1 kW
- 8,352UAH/kW
Prices are the typical market prices built into the Solispec engine, as of 06.10.2026; no margin, no VAT.
All 20 lines of the engine's estimate, with prices
| Item | Quantity | Price, UAH | Sum, UAH |
|---|---|---|---|
| Tube 60×60×2, stock length 6 000 mm | 6 bar | 210 | 7,560 |
| C-channel 60×40×2, stock length 6 000 mm | 8 bar | 230 | 11,040 |
| C-channel connector (splice plate L 300) | 4 pcs | 90 | 360 |
| Bolt M10×140 cl. 8.8 set — frame, struts | 20 pcs | 22 | 440 |
| Bolt M10×80 cl. 8.8 set — purlins, braces, connectors | 41 pcs | 22 | 902 |
| Bolt M10×150 cl. 8.8 set — strut to rafter, brace to post — through spacer inserts | 12 pcs | 27 | 324 |
| End clamp 30 mm | 8 pcs | 35 | 280 |
| Mid clamp (30–40 mm) | 20 pcs | 32 | 640 |
| Bolt M8×50 A2 + spring channel nut M8 | 31 pcs | 14 | 434 |
| Post base anchor pin (M10 / rebar Ø12) | 8 pcs | 20 | 160 |
| Borehole casing (roofing felt / PVC, 300 mm) | 8 pcs | 60 | 480 |
| Crushed stone 20–40 for the bottom of the boreholes | 0.06 m³ | 900 | 54 |
| Earth electrode: 2 rods Ø16×1.5 m + strip 40×4 | 1 set | 1,500 | 1,500 |
| Wire PV-3 6 mm² green-yellow | 21 m | 35 | 735 |
| Module earthing clip (under the clamp) | 12 pcs | 20 | 240 |
| Cable clip, stainless | 36 pcs | 5 | 180 |
| Zinc paint / cold galvanising spray 400 ml | 1 pcs | 350 | 350 |
| Concrete M200 for posts | 0.68 m³ | 3,800 | 2,584 |
| Rebar Ø10 (4 bars per post) | 42 m | 28 | 1,176 |
| Spacer inserts / packs — pieces of the same profile (from offcuts): 4 × 71 mm, 4 × 70 mm, 4 × 30 mm, 4 × 10 mm | 16 pcs | 0 | 0 |
| Materials | 29,439 | ||
Yield
Yield: 1,139 kWh per 1 kW a year, ≈ 6,013 kWh a year in total (median zone, Cherkasy; tilt 30°, the optimum for the latitude is 35.3°).
A preliminary calculation; a design needs an engineer's check. Snow and wind per DBN V.1.2-2:2006 for the regional centre; profiles, footings and estimate by the Solispec engine 0.12.0.