Solar plant: site data

Solar power plants: Autonomous Republic of Crimea

PVGIS data cover 1025 of 1025 places: 1 kWp yields from 1,174 kWh a year (Mnogorechye) to 1,390 (Uglovoye), median 1,284 kWh/kWp at an optimal tilt of about 35°. That is 13.1% more than the median of Ukraine — 1,135 kWh/kWp.

Median yield
1,284kWh/year
From — to
1,174–1,390kWh/year
Optimal tilt
35°median
Places with PVGIS data
1,025of 1025

Ground frame designer

A ground frame for a solar plant: Autonomous Republic of Crimea

The designer opens with latitude 45.0° and the DBN loads of the nearest regional centre — Херсон: snow 760 Pa, wind 480 Pa.

  • No sign-up
  • Snow and wind check
  • Drawings and estimate

Rayons

RayonPlacesMedian, kWh/kWpFrom — to
Bakhchysaraiskyi Raion851,3201,174–1,390
Bilohirskyi Raion1391,2601,186–1,294
Dzhankoiskyi Raion1141,2731,259–1,298
Yevpatoriiskyi Raion1201,3261,276–1,367
Kerchenskyi Raion711,3061,264–1,337
Kurmanskyi Raion1261,2671,253–1,293
Perekopskyi Raion841,3041,278–1,337
Simferopolskyi Raion1151,2931,231–1,367
Feodosiiskyi Raion1131,2751,229–1,365
Yaltynskyi Raion581,3221,251–1,354

Towns and rayon centres

Autonomous Republic of Crimea: PVGIS yield of 1 kWp and the optimal tilt
PlaceRayonkWh/kWpTilt
AlushtaYaltynskyi Raion1,28835°
ArmyanskPerekopskyi Raion1,31736°
BakhchysarayBakhchysaraiskyi Raion1,32036°
BilohirskBilohirskyi Raion1,26136°
DzhankoyDzhankoiskyi Raion1,27335°
FeodosiyaFeodosiiskyi Raion1,27735°
IchkiFeodosiiskyi Raion1,26735°
Islyam-TerekFeodosiiskyi Raion1,29335°
KerchKerchenskyi Raion1,30935°
KurmanKurmanskyi Raion1,26235°
NizhnegorskiyBilohirskyi Raion1,27035°
RozdolnePerekopskyi Raion1,31936°
SimferopolSimferopolskyi Raion1,29336°
SudakFeodosiiskyi Raion1,34036°
YaltaYaltynskyi Raion1,31335°
Yany KapuPerekopskyi Raion1,31836°
YevpatoriyaYevpatoriiskyi Raion1,33836°

Snow and wind

The nearest regional centre in the DBN — Херсон: S₀ = 760 Pa, W₀ = 480 Pa (DBN V.1.2-2:2006). Each place’s page names its own nearest centre and the distance. Snow and wind: Херсон

Free calculators

Sources

Preliminary calculation: a design needs an engineer’s check.