Solar plant: site data
Solar power plant in Dubshary, Kaluskyi Raion, Ivano-Frankivsk Oblast
Dubshary: 1,016 kWh per kWp a year, tilt 37° facing south (PVGIS). 7.4% below the oblast median (1,097). #152 of 162 in the rayon, #666 of 700 in the oblast.
Kalush, the rayon centre, is 29 km away. 527 m above sea level — above 500 m the DBN snow and wind are higher. 29 km away: Kalush, the nearest bigger centre, 1,086 — 6.5% less here. Snow and wind from the nearest regional centre in the DBN — Івано-Франківськ, 46 km. 11.09 m between rows, pitch 14.91 m (latitude 48.8°).
- Yield of 1 kWp
- 1,016kWh/year
- Tilt
- 37°facing south
- 10 kW
- 10,159kWh/year
- Row pitch
- 14.91m · GCR 0.32
- T_min
- -38 °Cregion IIIA, Carpathian
- Snow S₀ / wind W₀
- 1,410 / 500Pa
Ground frame designer
A ground frame for a solar plant: Dubshary
The designer opens with this place’s coordinates, latitude 48.8° for the row spacing and the DBN loads of the nearest regional centre — Івано-Франківськ, 46 km: snow 1,410 Pa, wind 500 Pa.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
August: 120 kWh/kWp, December: 33 — 3.6 times less.
December: 33 against 38 in the oblast, 13.2% less.
| kWp | A year | August | December |
|---|---|---|---|
| 5 | 5,080 | 600 | 165 |
| 10 | 10,159 | 1,200 | 330 |
| 15 | 15,239 | 1,800 | 495 |
Snow and wind: Івано-Франківськ
Example: a 10 kW ground frame
For the loads of Ivano-Frankivsk: 11.16 kWp, 18 panels, 410 kg of steel, 16 piles, materials ≈ 54,212 UAH.
How these numbers are computed
Nearby
- Pidlissia2 km1,055 kWh/kWp
- Letsivka3 km1,048 kWh/kWp
- Pidsukhy3 km1,063 kWh/kWp
- Pohorilets4 km1,067 kWh/kWp
- Ivanivka4 km1,077 kWh/kWp
- Ripne4 km1,061 kWh/kWp
All places: Kaluskyi RaionIvano-Frankivsk Oblast: rayons and towns
Free calculators
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation and divisions (changed)
- DBN V.1.2-2:2006, DSTU-N B V.1.1-27:2010
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.