Germany: solar plant site data
Solar power plant in Landshut, Germany: yield, tilt angle and row spacing
Landshut: 1,121 kWh per kWp a year at the optimal tilt of 37°, facing south (PVGIS). 7.3% above the median of the main cities of Germany (1,045). #21 of 193 main cities of Germany by yield. For comparison, Kyiv: 1,114 kWh/kWp — 0.6% more here.
Landshut is in Bavaria. Population 71,863 (GeoNames). 488 m above sea level. 54 km away: Regensburg, the nearest bigger city, 1,112 kWh/kWp — 0.9% more here. 10.84 m between rows, pitch 14.66 m, GCR 0.33 (latitude 48.5°).
- Yield of 1 kWp
- 1,121kWh/year
- Tilt
- 37°facing south
- 10 kW
- 11,212kWh/year
- Row pitch
- 14.66m · GCR 0.33
- Rank in the country
- 21of 193 cities
Ground frame designer
A ground frame for a solar plant: Landshut
Latitude 48.5°: the tilt and the row pitch follow it. Enter the snow and wind for Germany in the designer, by the national annex to the Eurocode.
- No sign-up
- Snow and wind check
- Drawings and estimate
Yield by month
July: 134 kWh/kWp, December: 39 — 3.4 times less.
December: 39 against the median of 30 for the main cities of Germany, 30.0% more.
| kWp | A year | July | December |
|---|---|---|---|
| 5 | 5,606 | 670 | 195 |
| 10 | 11,212 | 1,340 | 390 |
| 15 | 16,818 | 2,010 | 585 |
Snow and wind loads
Snow and wind loads for a site in Germany follow DIN EN 1991-1-3/NA (snow load zone, Schneelastzone) and DIN EN 1991-1-4/NA (wind zone, Windzone). Solispec computes loads by the Ukrainian DBN V.1.2-2 only, so this page shows no snow or wind values for Germany: enter the characteristic values from these documents in the designer’s «Own snow S0» and «Own wind W0» fields.
The frame calculation for such a site is preliminary: before installation it must be checked by an engineer who works to the country’s standards.
Nearby cities
Sources
- PVGIS © European Union, 2001–2026 — yield, tilt and azimuth, data as of 2026-10-10
- GeoNames (CC BY 4.0) — coordinates, elevation, population and divisions (changed)
- Where to take snow and wind loads from: DIN EN 1991-1-3/NA, DIN EN 1991-1-4/NA
- How these numbers are computed
Preliminary calculation: a design needs an engineer’s check.