Aiko
Ground frame for 5 Aiko Comet 2N AIKO-A620-MAH72Mw panels (1×5)
1 row of 5 panels, 3.10 kW. The Solispec engine chose the profiles, the frame pitch and the footings for three snow and wind zones: Kherson has the lowest load of the regional centres, Cherkasy the median, Chernihiv the highest.
- Power
- 3.10kW
- Steel
- 140.5kg
- Posts
- 8
- Bolts
- 54
- Materials
- 20,935₴
- Yield
- 3,530kWh/year
Figures for the median zone (Cherkasy); all three zones are in the table below.
Ground frame designer
Open this frame in the builder
The builder opens with the Aiko Comet 2N AIKO-A620-MAH72Mw panel and the 1 × 5 layout; site — Cherkasy. Change the site, the tilt or the profiles and the checks and estimate are recalculated.
- No sign-up
- Snow and wind check
- Drawings and estimate
Three snow and wind zones
The same table designed for three regional centres: with the lowest, the median and the highest combined snow and wind load under DBN V.1.2-2:2006. For another site, open the frame in the builder.
| Parameter | Low loadKherson · S₀ 760 · W₀ 480 | Median loadCherkasy · S₀ 1,520 · W₀ 420 | High loadChernihiv · S₀ 1,720 · W₀ 410 |
|---|---|---|---|
| Posts | C-channel 80×40×2 | Tube 60×60×2 | Tube 60×60×2 |
| Rafters | C-channel 80×40×2 | C-channel 60×40×2 | C-channel 60×40×2 |
| Purlins and braces | C-channel 41×41×2.5 | C-channel 60×40×2 | C-channel 60×40×2 |
| Frames | 4 frames, pitch up to 1,780 mm | 4 frames, pitch up to 1,780 mm | 4 frames, pitch up to 1,780 mm |
| Posts | 8 | 8 | 8 |
| Footings (bored concrete) | 8 pcs, Ø300 mm, depth 900 mm | 8 pcs, Ø300 mm, depth 1,100 mm | 8 pcs, Ø300 mm, depth 1,300 mm |
| Concrete | 0.56 m³ | 0.68 m³ | 0.81 m³ |
| Tilt | 30° | 30° | 30° |
| Panel bottom / post top | 600 / 1,326 mm | 600 / 1,318 mm | 600 / 1,318 mm |
| Panel field size | 5,890 × 1,419 mm | 5,890 × 1,423 mm | 5,890 × 1,423 mm |
| Row spacing between tables (no shade on 21 December) | 5,210 mm at noon · 5,860 mm ±2 h | 5,780 mm at noon · 6,670 mm ±2 h | 6,330 mm at noon · 7,530 mm ±2 h |
| Steel | 116.6 kg | 140.5 kg | 146.3 kg |
| Bolts | M10 — 42, M8 — 12 | M10 — 42, M8 — 12 | M10 — 42, M8 — 12 |
| Panel clamps | end 4, middle 8 | end 4, middle 8 | end 4, middle 8 |
| Materials | 19,421 UAH | 20,935 UAH | 21,597 UAH |
| With installation and delivery | 28,436 UAH | 29,960 UAH | 30,622 UAH |
| Per 1 kW | 9,173 UAH/kW | 9,665 UAH/kW | 9,878 UAH/kW |
| Yield | 1,266 kWh/kW · 3,926 kWh/year | 1,139 kWh/kW · 3,530 kWh/year | 1,043 kWh/kW · 3,234 kWh/year |
| Strength σ/fy | 86% | 67% | 72% |
| Deflection / (L/200) | 76% | 47% | 50% |
| Rafter strength | 8% | 16% | 17% |
| Post utilisation | 12% | 7% | 7% |
| Utilisation | 64% | 46% | 38% |
| Depth vs frost depth | ok | ok | ok |
| Checks overall | with a caution | passes | passes |
Checks and cautions
Member utilisation as the engine computes it. Cautions are checks that pass, but with a small margin.
- Max. frame pitch, mmThe purlins between the frames are used above 80 % (strength or deflection): the structure passes, but the margin is small. A shorter frame pitch or a deeper purlin gives more margin.Kherson: Frame spacing 1 780 mm, 4 frames. Purlin C-channel 41×41×2.5: strength 86%, deflection 76% of L/200 (snow on panel 489 Pa).
Bill of materials
The parts of one table for the median zone (Cherkasy): mark, name, profile, cut length, quantity.
| Mark | Part | Profile | Length, mm | Quantity |
|---|---|---|---|---|
| П1 | Front post | Tube 60×60×2 | 2,013 | 4 |
| П2 | Rear post | Tube 60×60×2 | 2,443 | 4 |
| Кр1 | Rafter (inclined beam) | C-channel 60×40×2 | 1,483 | 4 |
| Пк1 | Frame strut | C-channel 60×40×2 | 981 | 4 |
| Х1 | Longitudinal brace (cross) | C-channel 60×40×2 | 1,934 | 4 |
| Р1 | Purlin (rail) | C-channel 60×40×2 | 5,890 | 2 |
| — | Bolt M10×25 set · purlins, braces, connectors | — | — | 2 |
| — | Bolt M10×80 set · purlin to rafter | — | — | 8 |
| — | Bolt M10×90 set · strut to post — through spacer inserts | — | — | 4 |
| — | Bolt M10×130 set · post–rafter — through spacer inserts | — | — | 16 |
| — | Bolt M10×140 set · strut to rafter — through spacer inserts | — | — | 4 |
| — | Bolt M10×150 set · brace to post — through spacer inserts | — | — | 8 |
| — | End clamp 33 mm | — | — | 4 |
| — | Mid clamp (30–40 mm) | — | — | 8 |
| — | Bolt M8×50 + channel nut | — | — | 12 |
| — | Concrete for 8 posts, Ø300×1100 | — | — | 0.68 m³ |
Profile cutting
9 bars of 6,000 mm, 47.2 m of profile in total.
- Tube 60×60×24 bars
- C-channel 60×40×25 bars
Estimated cost
The engine's materials estimate for the median zone (Cherkasy).
- Materials
- 20,935₴
- With installation and delivery
- 29,960₴
- Per 1 kW
- 9,665UAH/kW
The engine's estimate has 22 lines; the full list is in the builder. Prices are the typical market prices built into the Solispec engine, as of 06.10.2026; no margin, no VAT.
Yield
Yield: 1,139 kWh per 1 kW a year, ≈ 3,530 kWh a year in total (median zone, Cherkasy; tilt 30°, the optimum for the latitude is 35.3°).
A preliminary calculation; a design needs an engineer's check. Snow and wind per DBN V.1.2-2:2006 for the regional centre; profiles, footings and estimate by the Solispec engine 0.12.0.