Section of the table from the Solispec engine (Chernivtsi)

Ground plant · Chernivtsi

A 5 kW ground-mounted solar plant in Chernivtsi: structure, materials, cost

10 Ulica UL-620M-132DDGN (dual glass bifacial) panels (6.20 kW) on 1 table of 2 × 5. Snow and wind per the DBN for Chernivtsi: S₀ 1,320 Pa, W₀ 500 Pa.

Power
6.20kW
Steel
258.8kg
Posts
10
Bolts
84
Materials
33,865₴
Yield
7,371kWh/year

Ground frame designer

Design the 5 kW plant in the builder

Opens the 2 × 5 table with the Ulica UL-620M-132DDGN (dual glass bifacial) panel and the loads for Chernivtsi.

  • No sign-up
  • Snow and wind check
  • Drawings and estimate

Panel

Ulica UL-620M-132DDGN (dual glass bifacial): 620 W, 2,382 × 1,134 mm, portrait.

The table's structure

Layout1 table, each 2 × 5 = 10 panels
Loads (DBN V.1.2-2:2006)snow S₀ 1,320 Pa, wind W₀ 500 Pa, frost depth 0.8 m
PostsTube 60×60×2
RaftersC-channel 60×40×2
Purlins and bracesC-channel 60×40×2
Frames5 frames, pitch up to 1,370 mm
Posts10
Footings (bored concrete)10 pcs, Ø350 mm, depth 1,050 mm
Concrete1.11 m³
Tilt30°
Panel bottom / post top600 / 2,287 mm
Panel field size5,890 × 3,102 mm
Row spacing between tables (no shade on 21 December)11,400 mm at noon · 13,010 mm ±2 h
Steel258.8 kg
BoltsM10 — 60, M8 — 24
Panel clampsend 8, middle 16
Materials33,865 UAH
With installation and delivery50,545 UAH
Per 1 kW8,152 UAH/kW
Yield1,189 kWh/kW · 7,371 kWh/year

Checks and cautions

CheckValueStatus
Strength σ/fy41%passes
Deflection / (L/200)22%passes
Rafter strength86%with a caution
Post utilisation17%passes
Utilisation87%with a caution
Depth vs frost depthokpasses
  • Rafter profileThe rafter is used above 80 %, or the frame's posts stand far apart: the structure passes, but the margin is small.Rafter C-channel 60×40×2: span between posts 2 276, cantilever 824 mm → strength 86%.
  • Embedment, mmThe footing resists wind uplift at above 80 % utilisation, or it is shallower than the frost depth. The soil resistance in the calculation is an estimate — check the soil on site.Foundation Ø350 × 1 050: 0.101 m³ of concrete per post. Wind uplift on the front post ≈ 9.4 kN (with γ=1.5) vs ≈ 10.8 kN (concrete weight + soil friction, estimate) → 87%.

Bill of materials

MarkPartProfileLength, mmQuantity
П1Front postTube 60×60×22,2245
П2Rear postTube 60×60×23,3625
Кр1Rafter (inclined beam)C-channel 60×40×23,9245
Пк1Frame strutC-channel 60×40×21,8185
Х1Longitudinal brace (cross)C-channel 60×40×22,1474
Р1Purlin (rail)C-channel 60×40×25,8904
—Bolt M10×25 set · purlins, braces, connectors——2
—Bolt M10×80 set · purlin to rafter——20
—Bolt M10×90 set · strut to post — through spacer inserts——5
—Bolt M10×130 set · post–rafter — through spacer inserts——20
—Bolt M10×140 set · strut to rafter — through spacer inserts——5
—Bolt M10×150 set · brace to post — through spacer inserts——8
—End clamp 30 mm——8
—Mid clamp (30–40 mm)——16
—Bolt M8×50 + channel nut——24
—Concrete for 10 posts, Ø350×1050——1.11 m³

Profile cutting

16 bars of 6,000 mm, 88.8 m of profile in total.

  • Tube 60×60×25 bars
  • C-channel 60×40×211 bars

Estimated cost

Materials
33,865₴
With installation and delivery
50,545₴
Per 1 kW
8,152UAH/kW

The engine's estimate has 22 lines; the full list is in the builder. Prices are the typical market prices built into the Solispec engine, as of 06.10.2026; no margin, no VAT.

Yield

Yield: 1,189 kWh per 1 kW a year, ≈ 7,371 kWh a year in total for Chernivtsi (tilt 30°, the optimum for the latitude is 34.9°).

A preliminary calculation; a design needs an engineer's check. Snow and wind per DBN V.1.2-2:2006 for the regional centre; profiles, footings and estimate by the Solispec engine 0.12.0.

Other sizes in Chernivtsi

5 kW in other regional centres

Next