Section of the table from the Solispec engine (Sumy)

Ground plant · Sumy

A 3 kW ground-mounted solar plant in Sumy: structure, materials, cost

6 Ulica UL-620M-132DDGN (dual glass bifacial) panels (3.72 kW) on 1 table of 2 × 3. Snow and wind per the DBN for Sumy: S₀ 1,670 Pa, W₀ 420 Pa.

Power
3.72kW
Steel
172.1kg
Posts
6
Bolts
54
Materials
26,455₴
Yield
3,982kWh/year

Ground frame designer

Design the 3 kW plant in the builder

Opens the 2 × 3 table with the Ulica UL-620M-132DDGN (dual glass bifacial) panel and the loads for Sumy.

  • No sign-up
  • Snow and wind check
  • Drawings and estimate

Panel

Ulica UL-620M-132DDGN (dual glass bifacial): 620 W, 2,382 × 1,134 mm, portrait.

The table's structure

Layout1 table, each 2 × 3 = 6 panels
Loads (DBN V.1.2-2:2006)snow S₀ 1,670 Pa, wind W₀ 420 Pa, frost depth 1.3 m
PostsTube 60×60×2
RaftersC-channel 80×40×2
Purlins and bracesC-channel 60×40×2
Frames3 frames, pitch up to 1,560 mm
Posts6
Footings (bored concrete)6 pcs, Ø300 mm, depth 1,400 mm
Concrete0.65 m³
Tilt30°
Panel bottom / post top600 / 2,278 mm
Panel field size3,582 × 3,107 mm
Row spacing between tables (no shade on 21 December)12,680 mm at noon · 14,930 mm ±2 h
Steel172.1 kg
BoltsM10 — 38, M8 — 16
Panel clampsend 8, middle 8
Materials26,455 UAH
With installation and delivery37,121 UAH
Per 1 kW9,979 UAH/kW
Yield1,070 kWh/kW · 3,982 kWh/year

Checks and cautions

CheckValueStatus
Strength σ/fy73%passes
Deflection / (L/200)59%passes
Rafter strength72%passes
Post utilisation21%passes
Utilisation75%passes
Depth vs frost depthokpasses

No cautions.

Bill of materials

MarkPartProfileLength, mmQuantity
П1Front postTube 60×60×22,5653
П2Rear postTube 60×60×23,7033
Кр1Rafter (inclined beam)C-channel 80×40×23,9243
Пк1Frame strutC-channel 60×40×21,8113
Х1Longitudinal brace (cross)C-channel 60×40×22,2694
Р1Purlin (rail)C-channel 60×40×23,5824
—Bolt M10×25 set · purlins, braces, connectors——2
—Bolt M10×90 set · strut to post — through spacer inserts——3
—Bolt M10×100 set · purlin to rafter——12
—Bolt M10×130 set · post–rafter — through spacer inserts——12
—Bolt M10×140 set · strut to rafter — through spacer inserts——3
—Bolt M10×150 set · brace to post — through spacer inserts——4
—Bolt M10×150 set · post, insert and two overlapping braces — one hole——2
—End clamp 30 mm——8
—Mid clamp (30–40 mm)——8
—Bolt M8×50 + channel nut——16
—Concrete for 6 posts, Ø300×1400——0.65 m³

Profile cutting

13 bars of 6,000 mm, 59.4 m of profile in total.

  • Tube 60×60×25 bars
  • C-channel 80×40×23 bars
  • C-channel 60×40×25 bars

Estimated cost

Materials
26,455₴
With installation and delivery
37,121₴
Per 1 kW
9,979UAH/kW

The engine's estimate has 24 lines; the full list is in the builder. Prices are the typical market prices built into the Solispec engine, as of 06.10.2026; no margin, no VAT.

Yield

Yield: 1,070 kWh per 1 kW a year, ≈ 3,982 kWh a year in total for Sumy (tilt 30°, the optimum for the latitude is 35.8°).

A preliminary calculation; a design needs an engineer's check. Snow and wind per DBN V.1.2-2:2006 for the regional centre; profiles, footings and estimate by the Solispec engine 0.12.0.

Other sizes in Sumy

3 kW in other regional centres

Next